Universal Crusher Features

Lead: The universal grinder uses the high-speed relative motion seen by the movable toothed disc and the fixed toothed disc to make the pulverized material get crushed by the combined action of tooth impact, friction and material impact.

Material from the hopper through the dithering device into the crushing chamber, centrifugal force generated by the high-speed rotation of the movable tooth plate is thrown from the center to the chamber wall, impact, shear, grinding and the steel teeth between the movable tooth plate and the fixed tooth plate. The impact between the materials is crushed, and the final material reaches the annular space on the outer wall of the turntable. The fine particles are discharged from the bottom through the contour sieve plate, and the coarse powder is repeatedly crushed in the machine.

Universal crusher mainly has the following characteristics:

1. High output, low noise, low energy consumption, simple maintenance, easy installation, etc.;

2. The gap between the rotor and the stator is accurate and the crushing effect is the best;

3, good sealing performance, built-in labyrinth seals, O-ring sealing machine door, to prevent dust escape;

4, due to the high-speed rotation of the rotor, brings in a lot of air, so there is a self-cooling function, can be applied to require lower heat-sensitive material crushed;

5, system pipe connection using quick release structure, quick and easy disassembly, cleaning;

6, can be equipped with cyclone separator and dust collector, no dust during the production process, dust traps can effectively trap the micro-powder in the air. At the same time, fine powder trapped by dust traps can be effectively recovered, reducing the material loss rate.