Regardless of whether you are driving carefully or not, in Guangzhou, where the traffic conditions are so complicated, you may face the problem of vehicle scratching every day. Just like someone jokingly said, “Even if you don’t hit people, it’s hard to avoid being hit by others†. As a car owner, besides the need for good driving habits and superb driving skills, it is also necessary to understand the handling of some vehicle scraping accidents. ◠Shut down and check the status If your car accidentally scrapes with other cars, you should immediately choose a suitable place to stop. Tighten the hand brake, cut off the power, turn off the car's engine. There must also be wide and tail lights at night. On the highway, a hazard warning sign must be placed behind the vehicle. ◠Confirm the safety status of both sides Pay attention to check the safety conditions of the personnel on both sides. If there are casualties, injuries, or personal safety, you should immediately call the police. For the eight situations that do not belong to the new "Road Traffic Accident Procedure Procedural Rules", which must be reported to the police, the parties may choose to reach an agreement on their own and handle it expeditiously. ◠Record vehicle damage Pay careful attention to checking the condition of the vehicle. It is best to carry a device that has camera functions, such as a digital camera, a mobile phone, etc., and record the scratch area and vehicle condition in time. When photographing, it is necessary to reflect the framing of both parties at the same time on the scene, and to photograph the front side, the rear side, and the rubbing part of the vehicle from various angles. ◠Record basic information Pay attention to both vehicle information and owner information. It is necessary to record information such as the license plate number, driver's license, driving license, and health insurance card. ◠Clear responsibility When the traffic police conducts the responsibility determination, special attention should be paid to the responsibilities of both parties. Common situations include: not maintaining a safe distance, rear-end vehicles, rear vehicles bear responsibility; motor vehicles change lanes, affecting the normal driving of vehicles, change lanes bear responsibility; traffic lights control intersections, normal release of the vehicle turns In the event that a straight ahead vehicle is not allowed to turn, the turning vehicle will take responsibility; if there is no traffic light crossing, the right road will not be allowed to enter the car first, and the party will not be held liable. ◠Loss of vehicles will be adjusted claims First go to the Insurance Claims Service Center to fix the vehicle. In the following car repair procedures, you must keep a good car invoice. PTA Powder
Main application:Repair and
strengthen workpiece surface, significantly
Welding method:PTA welding
Main equipment:PTA welding
machine
Flame core temperature: about 10000℃
Technological characteristics:PTA has high
temperature, concentrated energy, stable combustion, small heat affected zone,
fast welding speed, high production efficiency, easy to obtain low dilution
rate of surfacing layer, surfacing layer and workpiece matrix are metallurgical
bonding,, bonding strength is high.
PTA welding technology is one of surface
strengthening methods, which has high deposition rate, low dilution rate, and
could be applied with many kinds of powder. The manufacturing craft of PTA
powder is normally gas atomization, which reduces satellite of powder. We
supply 4 main categories of PTA powder: Nickel-based alloy powder, Iron-based
alloy powder, Cobalt-based alloy powder and Mixed Powder.
Nickel Based Alloy Powder possesses high
temperature resistance and wear resistance, it is the most popular alloy powder
applied by PTA welding both domestically and internationally. Coating hardness
is within the range of HRC 30-60. It could be applied to various industries
like agriculture, plastic, paper, marine and steel making where wear and
corrosion protection needed. Some examples are plunger, moulds, pump leaf and
screw.
Iron Based Alloy Powder is more widely used
and a more economic choice. With high abrasive resistance, it is more commonly
applied to mining tools, drilling tools and mixers of iron and steel making
industry, coal industry, shaft, oil and energy industry.
Cobalt Based Alloy Powder is recommended
for corrosion and oxidation resistance, with better hot hardness values than
equivalent Nickel based alloy powder. It is widely applied to steel making
industry, coal industry and mining industry.
Mixed powder mainly refers to NiCrBSi
mixing with other hard-phase powder such as cast tungsten carbide and other cemented
alloy powder, which allows the powder better hardness around HRC60 and
excellent abrasion resistance.
Mixed powder is more often used for mining
equipment for oil sands, lignite, oil drilling tools, excavator buckets,
extrusion screws for plastic processing, grain and oil processing, etc.
PTA Powder,Iron Based Alloy Powder,Cobalt Based Alloy Powder,Nickel Based Alloy Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvaf.com