VPA Series Single Stage Vacuum Pump (CE, ROHS) (VP0.5A)

Model NO.: VP0.5A
Model Number: Vp0.5A
Net Weight: 6.6kg
Oil Capcity: 160ml
Trademark: OEM
Specification: CE, RoHS, etc.
Origin: China
Model NO.: VP0.5A
Model Number: Vp0.5A
Net Weight: 6.6kg
Oil Capcity: 160ml
Trademark: OEM
Specification: CE, RoHS, etc.
Origin: China
VPA Series Single Stage Vacuum Pump     

VPA Series Single Stage Vacuum Pump (CE, ROHS) (VP0.5A)
                
           A good quality vacuum pump is an integral tool for complete A/C service. Poly Run vacuum pumps are durable and time tested. They stand up to the most grueling conditions and will provide years of reliable service. Poly Run offers a complete selection of pumps. Regradless of you service requirements, Poly Run has a model for your application.

        Poly Run single stage vacuum design pulls vacuum fast to 20Pa. Adavanced two stage design pulls deep vacuum fast to 3Pa. Dual voltage design vacuum pump operations on 115VAC or 220VAC (50 or 60Hz).




Voltage
 
220V/50 HZ
 
110V/60HZ
 
Free Air Displacement
 
1 CFM
 
1.2 CFM
 
30 L /min
 
0.5 L /S
 
35 L /min
 
0.58 L /S
 
Ultimate Vacuum
 
10 Pa
 
75 Microns
 
0.1 mbar
 
Motor
 
1/6HP
 
Rotating Speed
 
1440 r/min
 
1720 r/min
 
Intake Fitting
 
1/4SAE
 
Oil Capacity
 
160 ml
 
Dimension
 
250 x 110 x 250 mm
 
Net Weight
 
6.6 kg
 

VPA Series Single Stage Vacuum Pump     

VPA Series Single Stage Vacuum Pump (CE, ROHS) (VP0.5A)
                
           A good quality vacuum pump is an integral tool for complete A/C service. Poly Run vacuum pumps are durable and time tested. They stand up to the most grueling conditions and will provide years of reliable service. Poly Run offers a complete selection of pumps. Regradless of you service requirements, Poly Run has a model for your application.

        Poly Run single stage vacuum design pulls vacuum fast to 20Pa. Adavanced two stage design pulls deep vacuum fast to 3Pa. Dual voltage design vacuum pump operations on 115VAC or 220VAC (50 or 60Hz).




Voltage
 
220V/50 HZ
 
110V/60HZ
 
Free Air Displacement
 
1 CFM
 
1.2 CFM
 
30 L /min
 
0.5 L /S
 
35 L /min
 
0.58 L /S
 
Ultimate Vacuum
 
10 Pa
 
75 Microns
 
0.1 mbar
 
Motor
 
1/6HP
 
Rotating Speed
 
1440 r/min
 
1720 r/min
 
Intake Fitting
 
1/4SAE
 
Oil Capacity
 
160 ml
 
Dimension
 
250 x 110 x 250 mm
 
Net Weight
 
6.6 kg
 

Water Treatment Membrane

Perfluorinated sulfonic acid H - type perfluorinated ion membrane products. Perfluorinated proton membrane is used as a solid electrolyte separating anode and cathode in various electrolytic cells and batteries, and the membrane has the attribute of cationic unidirectional passage. Due to the use of polytetrafluoron as the main chain, the most appropriate molecular weight and ion-exchange capacity are adjusted, and the characteristics of chemical resistance and durability are shown. Widely used in: Vanadium Battery, liquid flow battery, fuel cell, water electrolysis hydrogen production, chlor-alkali industry, water electrolysis hydrogen production, chlorine dioxide generator, amino acid refining, gold salt preparation, etching liquid recovery copper, electroplating and other fields.

N-w series (116W)

Perfluorinated Ion Exchange Membrane is especially suitable for hydrogen rich water cup hydrogen production, hydrogen absorption machine, hydrogen rich water machine, etc. NW series using 1000 equivalent high quality perfluorinated sulfonic acid ion exchange resin as raw material, using the new ducting process manufacturing, because ducting process can be combined with doping technology, so the manufacturing membrane not only has high tensile strength, isotropic, high conductivity, no odor, good durability and other characteristics.

N - 21 series

Widely used in: vanadium battery, liquid flow battery, fuel cell, water electrolysis hydrogen production and other fields

N - 41 ptfe series

N-41ptfe series is a composite perfluorinated sulfonic acid H type perfluorinated ion film produced by steel strip ducting method. Perfluorinated ionic membrane as the separation of Yin and Yang in all kinds of cell and battery very solid electrolyte, membrane has the property of unidirectional by cation, and because of the high strength as support layer teflon mesh cloth, with the most appropriate molecular weight and ion exchange capacity of perfluorinated sulfonic acid resin, N - 41 series compound perfluorinated ionic membrane has the characteristics of strong chemical resistance and durability. Widely used in: chlor-alkali industry, water electrolysis hydrogen production, chlorine dioxide generator, amino acid refining, gold salt preparation, etching liquid recovery copper, electroplating and other fields.

N31 series

Proton exchange membranes for fuel cells

Perfluorinated membrane N-301x PTFE reinforced series is a composite perfluorinated sulfonic acid H-type proton exchange membrane produced by Kerun Company using steel strip ducting method combined with ePTFE micropore reinforced material. N - 301 - x PTFE enhanced series of proton exchange membrane has the property of cationic one way through, and adopt PTFE microporous membrane as a skeleton with high-performance perfluorinated sulfonic acid ion exchange resin, adjust the most suitable molecular weight and ion exchange capacity, with a thickness of thin, low strength, high electrical conductivity, swelling, size stability, good durability, etc. N-301x ePTFE enhanced proton membrane exchange is particularly suitable for fuel cells.

N515 series

Using high strength PTFE mesh cloth as a support layer, with the most appropriate molecular weight and ion exchange capacity of perfluorinated sulfonate resin, with super chemical resistance and durability, widely used in high salt wastewater treatment, electrodialysis and other water treatment fields.

Perfluorinated sulfonate resin dispersion

N-pies is made of imported resin raw materials to prepare perfluorinated ion exchange solution, which can be used as proton exchange membrane electrolyte film and CCM catalyst coating for fuel cells, electrochemical sensors and other devices; It can also be used to repair perfluoroion membrane.

PerfluorosulfonateIon ExchangeResin (PerfluorosulfonateIon-ExchangeResin)

Appearance: White powder, granular

Main USES: PREPARATION OF various ELECTROLYtic devices required ion exchange membrane, fuel cell ion membrane, vanadium battery ion exchange membrane, chlor-alkali industry ion membrane, hollow fiber membrane, organic synthesis used in the use of super acid catalyst, super stable ion exchange agent

Water Treatment Membrane,Water Treatment Ion Exchange Membrane,Water Treatment Ro Membrane,Water Treatment Ptfe Mbr Membrane

Mianyang Prochema Commercial Co.,Ltd. , https://www.gustek.com