Aluminum cooling plate widely use in the heat exchange industry. Such as electric vehicle battery cooling, Refrigerator,solar energy etc. We have production line like automatic brazing line continuously, CNC machines, automatic parallel flow preloader, hydraulic pressing machine, ultrasonic cleaning machine, automatic circular argon arc welding machine, automatic welding spray system etc. We have whole set test equipment like vacuum helium detection system, air impermeability testing equipment, flow internal decay experimental system etc Aluminum brazed plate,Aluminium brazed plate,Aluminum cooling plate Trumony Aluminum Limited , https://www.szaluminumtube.com
1. Product Life Cycle Costs The cost of a product depends on its entire life cycle: development and manufacturing costs, installation and use costs, maintenance costs and withdrawal of operating costs (demolition and destruction). Compared with other aspects of the cost, maintenance costs are intangible and cannot be estimated. With the increase of time, the cost may increase rapidly. The tangible sum of costs (development and manufacturing costs, installation and use costs, and withdrawal of operating costs) are just the tip of the iceberg. Maintenance costs are still on the surface. You can't estimate how big the entire iceberg is.
At present, the labor cost is too high. Fire engineering contractors and owners should have a profound experience. The product itself may not be worth much money, but the labor cost is far higher than the product, which is one of the reasons for maintenance costs can not be measured. At the same time, it also left the impression of unstable product quality, and the reputation of dealers and manufacturers suffered great losses.
2, the product's life cycle quality The quality of the product from the manufacturer's point of view, is the product's quality at the time of shipment, as long as the quality of the factory is good, that is qualified products. From the point of view of customers such as dealers or owners, product quality is the quality of the entire life cycle: factory, transportation, installation and commissioning, and use until the product exits operation. The quality of the entire product life cycle is what we call product reliability.
Probably we have seen a phenomenon that no matter whether it is a company, a government, or an individual, key products can be used without using domestic products, and they would rather use imported products at prices several times or even tens of times more expensive than domestic ones. . In fact, domestic products and foreign products are not much different in terms of performance, function, and quality. The main difference is the reliability of the products. As most people have experience, Nokia's mobile phone is resistant to falling. Especially good, how to fall is not bad, domestic mobile phone? The domestic Shanzhai mobile phone is far more powerful than Nokia's mobile phones in terms of functionality, but the quality will be such a problem. A big difference between domestic and foreign products is the reliability of the product.
Through the simple analysis above, it can be known that the maintenance cost of the electrical fire monitoring system of dealers and owners is quite large, and the reliability and cost of the product must have an appropriate balance point. It is necessary to consider from the entire product life cycle, not only from Factory quality to consider.
The relationship between reliability and cost of electrical fire monitoring system
The maintenance cost of the electrical fire monitoring system is quite large. The reliability and cost of the product must have an appropriate balance point. Considering the entire product life cycle, it cannot be considered only from the factory quality. The following analysis of the relationship between reliability and cost of electrical fire monitoring systems is as follows:
Release date:2012/2/7 13:49:01