Stainless Steel Plate has a wide range of uses, like architecture, decorations and kitchenware and so on. There are many grades for stainless steel plate, including 304 stainless steel sheet, 304L plate, 316 stainless steel sheet, 316L plate, 409L, 430,441 plate.
Specification for stainless steel plate
1.Thickness:0.4mm to 3mm (Cold Rolled process)
3mm to 35mm (hot rolled process)
2.Width:1000mm,1219mm,1220mm,1500mm,1800mm
3.Length:2000mm,2438mm, 2400mm,3000mm,6000mm
4.Technical treatment:Hot Rolled/Cold Rolled
5.Manufacture standard:ANSI,ASTM,JIS,EN, DIN,GB
Stainless steel plates can be cut to length according to customers` request. And they shall be packed by wooden pallets.
Stainless Steel Plate Stainless Steel Plate,Stainless Steel Plate Covers,Stainless Steel Plate Thickness,Stainless Steel Plate Rack CANGZHOU HENGJIA PIPELINE CO.,LTD , http://www.czhjpipe.com
Well Chi 22 is a main production gas well of the latent high point of the Daqing dry well structure grinding disc in eastern Sichuan, with a cumulative production of 1.24 billion cubic meters of natural gas. In view of the fact that the formation pressure is low (23 MPa), the middle layer is deep (4364 m), and the gas production is required to resume production, the Southwest Gas and Oil Field Company Gas Production Engineering Research Institute boldly adopts conventional gas lift valves and imports. The new technology of VXD circulating sliding sleeve combination makes the sliding sleeve always open when the gas lifts, and the gas lift valve works to drain the liquid. After the liquid discharge is finished, the sliding sleeve is closed for production.
The successful application of this technology has provided a powerful measure for the technical research of the high-pressure deep well drainage in the Carboniferous in eastern Sichuan, and will become a new gas lift technology.
The new technology of Chuandong sliding sleeve and gas lift valve combination was successful
The new gas extraction technology of the combination of sliding sleeve and gas lift valve in the well of Chuandong Chi 22 has been successfully completed. The well resumed production in early September, with a daily output of 250,000 cubic meters of natural gas.