Recently, the “Intelligent Construction Engineering Construction Standard†edited by Tongfang Co., Ltd. was approved as a national standard by the Ministry of Construction and will be formally implemented on February 1, 2011. Some of these are mandatory articles and must be strictly enforced. Tong Xiaofang Zhao Xiaobo, Xu Zhenxi, and Zou Chaoqun participated in the preparation of the "Specifications." The "Specification" for the first time incorporated the "equipment monitoring system" and "integrated system" and other content, is the first comprehensive standard of all systems in one, and has certain reference and guidance for the intelligent building construction standards and procedures. Tongfang, as a leader in the intelligent building industry, gives full play to its unique advantages in system integration and applies more than 20 years of successful experience accumulated in its own development to the specification. It is used by the construction companies in the integration system software and hardware installation, system debugging, etc. Aspects paved the way. Up till now, the intelligent building industry has met the corresponding standard standards from design to construction and acceptance. (The “Intelligent Building Engineering Quality Acceptance Specification†is edited by Tongfang), “Many of the contents of the “Construction Regulations†refer to "Design specifications" and "acceptance specifications" are supplementary to them.As long as the technical personnel are standardized in design, the engineering personnel can construct according to the standards, so the acceptance personnel can also inspect according to requirements.The three specifications of seamless docking, supporting use, It promoted the virtuous circle of the whole process of design, construction and acceptance, and provided an effective basis for the healthy and orderly development of the industry.†said Xu Zhenxi, the author of the specification and the chief engineer of Tongfang Digital Urban Industry.
Y83 series block making machines are industrial machines designed to make maximum use of metal swarf such as cast iron, aluminum, copper, steel, brass, zinc, bronze, titanium and magnesium, they are also suitable for other machining scraps by pressing them into briquettes. It results in economic benefits for companies that generate the swarf, companies that recycle metal scraps, and for foundries that process the scraps. Also there is environmental benefits resulting from the briquetting process.
Metal Block Making Machine, Scraps Block Making Machine, Aluminum Block Making Machine, Steel Block Making Machine, Chips Block Making Machine Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-balingmachine.com