Rogue crimes committed 12 cases involving more than 500,000 yuan, 8 suspects were detained in the police detained Eight men in Ruijin, Jiangxi Province, worked in busy time and organized groups to “act†in various parts of the country: In front of the “Tibetan Mapâ€, they took “detectors†and dug “Golden Buddha†in the mountains – Yesterday, Suizhong Police It was announced that from September last year to July this year, this group of fraudsters had picked up in the mountainous areas of Gansu, Sichuan, and Shaanxi, and committed 12 crimes. The amount involved exceeded 500,000 yuan. At present, eight criminal suspects have been detained by criminals. The first act: old farmer invited to dig deep treasure On the morning of May 17, the five-day peasant Guanlin who lived in Laoguan Town, Langzhong City, was digging on the hillside. Nearly noon, two middle-aged men came from the mountain road. The two men turn around on the hillside, holding something in their hands, looking left and right, looking for something. They took the initiative to come and say hello to Guanlin, claiming to be from Fujian, to find something here. One of the tall men said that Grandpa is a senior military officer of the Kuomintang. He led the army and was stationed in the area of ​​Yuzhong. Grandpa collected a lot of valuable treasure. When he left Suizhong, he buried the most valuable baby in the area. On his deathbed, Grandpa gave a treasure map and said that he was able to find valuable baby in accordance with the instructions on the map. The other black-faced man took out a crumpled old yellowed paper from his pocket and outlined the hill with a brush. Is there really a baby buried in the mountains nearby? The letter will be suspicious. When the two men saw the situation, they took the initiative to consult with Guan Shulin. They did not dig their heads to dig the ground. They wanted to ask Shulin to help with the digging of treasures, and to find treasures to give him generous returns. Act II: Digging out the Golden Buddha to give a huge reward A quarter of a century later, the "probe" in the hands of the black-faced man issued a "bang and bang" sound. The black-faced man looked happy and immediately let Guan Shuzi dig his treasure within 5 meters of his standing position. Drilled five or six pits and found no baby. At this time, the "probe" sounded again, and the black-faced man had to close the woods and dig deeper in the previously dug pit. According to the instructions, the trees were dug down and a miracle emerged: A "Golden Buddha" shone in the sun. The tall man confirmed that "Golden Buddha" was left by his grandfather. He took the initiative to propose to Guan Shuqun 150,000 yuan. But he didn't bring that much money. He had to go home to withdraw money. The "Golden Buddha" is temporarily kept by the Guanlin Forest and is waiting to receive money. Redeem it again. The tall man placed the "Golden Buddha" in a plastic bag and sealed it. "My fingerprints are on the plastic bag. When I come back, I have to check it," said the tall man. Act III: Men Borrow Money in "Crash" After they left, Guan Shulin did not work every day. He waited at home and waited for a call. On the third day, he received a phone call from a tall man. He said that they were on the way back. They had a "car accident" on the highway in Chongqing. They hit a person to make compensation and could not get out without giving money. The other party opened his mouth and asked Lin to borrow money. When he called "Golden Buddha," he returned the money to him. "The God of Wealth" can't take it easy, and his 150,000 reward is not to be wandering! Guan Shu is more anxious than anyone else, and he has no way to sell the "Golden Buddha." After much deliberation, he had deposited 25,600 yuan into his account on three occasions. Since then, Guan Shulin has not been able to contact each other anymore. On the fourth day, Guan Shulin felt that things went awry and went to the local police station to report the case. On June 26, Zang Xiaoping, an old villager of the town of Guanlan, also fell into the same scam and was deceived with 26,000 yuan. The finale: committing 12 of 8 suspects arrested The police concluded that this was a group of fraudsters who had committed crimes. On August 3, the task force learned that the suspects had gathered in Cangxi County, Guangyuan, and were prepared to wait for an opportunity to commit crimes in Central China. On the evening of August 5, Suizhong police contacted Cangxi police and captured 8 suspects at a hostel. On the ceiling of the hostel's room, the police found more than 60 "Golden Buddhas", 12 "Tibet Maps" and 10 "detectors" modified by doorbells. It is reported that these 8 people are all Ruijin people in Jiangxi Province. They work when they are busy and when they are idle, they go to all parts of the country to dig for treasure. From September 2008 to July of this year, they successively went to Gansu, Sichuan, and Shaanxi to commit crimes 12 times before and after, and used the same tricks to defraud them of more than 500,000 yuan. Manganese Steel Plate Cutting Machine
Cutting
mode: Laser cutting
Suit
material: carbon steel, alloy steel, galvanized plate, stainless steel, copper
plate, aluminium plate, steel tube, copper pipe, aluminium pipe etc. sheet
matal.tube stock.
1.Product describe
Fast
cutting spead, high working efficiency and high stability, it is a high-tech
equipment that set one of fiber laser technology, CNC technology and high-tech
equipment.
2. Product features
Imported
with original packaging servo motor and reducer, bilateral drive, high
operating speed and high precision.
Can
remote operation, convenient and efficient, save labor.
Imported
cutting head, optical glass, focusing is convenient and cutting perfect.
Fiber
transmission, no need to adjusted the optical circuits, focal spot is more
smaller.
Adopted
auto lubrication system, auto dual-temperature control syatem, convenient and
efficient.
High
precision grinding guide rail, gear and rack, precision class up to ±0.02mm.
3.Product
parameters
Type
TI-3015
Effective
cutting width ( mm)
1500
Effective
cutting Length ( mm)
3000
Circular
tube diameter ( mm)
10-150
Square
tube size ( mm)
10-150
Range
of vertical stroke ( mm)
0-200
Input
power
AC380V/50Hz;AC220V/50Hz
Cutting
thickness ( mm)
0.3-15
Cutting
speed ( mm)
21000
(1000W/stainless δ1mm)
Idle
speed ( mm)
100000
Maximum
Acceleration (G)
1.2
Position
repeat accuracy ( mm)
±0.05
Laser
power (w)
500-1500
Drive
mode
Precision
rack bilateral drive
Laser
wavelength ( nm)
1080
Cooling
mode
water-cooling
Environmental
temperature
5-35℃
Cutting
material
Carbon
steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet
4.
Cutting samples
Cnc Laser Cutter,Manganese Steel Plasma Cutting Machine,Manganese Steel Gantry Cutting Machine,Manganese Steel Plate Cutting Machine Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com