This series of equipment can regenerate various types of activated carbon such as coal, wood, nut shell, mineral (petroleum), or powder, granule, column, or primary, extruded, and re-formed activated carbon, according to the characteristics of activated carbon fire method regeneration treatment , This series of equipment is equipped with unique flue gas treatment equipment to ensure the green and environmental protection of the activated carbon fire method regeneration process.
The device has the following characteristics:
1.Wide application field: the device can regenate various types of activated carbonon by adjusting the angle and rotational speed of furnace pipe.
2.Regeneration activated carbon in the oven retention time 40 minutes, which is applicable to the regeneration levelofall kinds of grain particles, for coal activated carbon also has good regeneration effect.
3.High degree of automation:the device operation achieves automatic control,with man-machine interface+Intelligent instrument control,reduces the operating workers and the labor intensity is low.
4.High recovery rate of Iodine value:basically returned to a new carbon levels above 90%.
5.Low carbon loss:≤1-2%(Coal carbon)But slightly higher than the JHR-O series activated carbon fuel diesel reclamation equipment
6.Easy installation, covers an area slightly larger, but the small space height requirements, large installed power.
Long service life:The core components furnace tube using thick wall (10 mm thick) 1200 ℃ high temperature resistance, corrosion resistant special stainless steel pipe.
Carbon Regeneration Kiln,Rotary Kiln Services,Carbon Regeneration Process,Chemical Regeneration Of Activated Carbon Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com
Taiwan revised two safety regulations for vehicle parts and components
In order to ensure consistency with the latest UN/ECE standards, in mid-February 2012, the Taiwan region issued two circulars to revise the fuel tanks for vehicles and child protection devices for vehicles on the existing standards.
UN/ECE, that is, the UN ECE Automobile Regulations, was established by the European Economic Commission in the 1950s to unify international vehicle technical regulations and promote international trade. The main reference for the revision of the relevant standards in the Taiwan area is the uniform provision of the UN/ECER34 Vehicle Fire Insurance Precautionary Measures Certification and the UN/ECER44 Uniform Regulations for the Infant Restraint Device Standards on motor vehicles.
The revision of two testing standards in Taiwan is no doubt a response to market demands. The fuel tank is the most flammable and explosive part of the vehicle body. This revision supplements the detailed requirements for structural safety to keep up with the latest European standards changes. At the same time, in recent years, the awareness and requirements of children's related products in European countries have become higher and higher, and Regulation No. 44 was formulated in 1995 for vehicle protection devices that may pose potential danger to children. The revised CNS11497 “Child Protection Device for Vehicles†(promulgated on June 7, 2010) in Taiwan also added all child protection devices for vehicles to the regulatory scope to protect the safety of children riding on vehicles.
Under the current international trade situation, the product standards of all countries are moving towards a consistent development, and the objects of interest are all developed countries and regions such as the European Union. Although China signed the UN/ECE agreement on the use of global motor vehicle technology in 2000, it must also pay sufficient attention to changes in the standards of certain exporting countries or regions. Here, the inspection and quarantine department reminds relevant auto parts manufacturers to actively refer to UN/ECE standards in the production process of various parts and components to improve product performance and improve product safety factor. While continuing to develop new markets, it is necessary to cultivate good internal strength, produce quality and safe products, establish its own brand, and expand product exports.