SICHUAN TELOS NEW MATERIAL TECHNOLOGY CO., LTD , https://www.telostool.com
The "new catalog" of the internal-combustion engine industry stipulates nine kinds, two kinds of additions to the "original catalogue," and all others increase technical specifications, from the original rated power ≤ 132.39 kW to ≤ 300 kW.
There are 154 new catalogues in the petrochemical general industry, 46 more than the “original catalogueâ€, mainly including: hydrogenation reactors, axial compressors, centrifugal compressors, centrifugal refrigeration units (output power ≤ 3000 kW), and screws. Refrigeration Units, Metering Pumps, Reciprocating Pumps, Electric Submersible Pumps, Submersible Pumps, Distillation Columns for Gas Separation Equipment, Plate-Fin Heat Exchangers, Expanders, Flexo Printing Machines, Gravure Printing Machines, Letterpress Printing Machines, And 5 kinds of separation equipment, 3 kinds of filtration and purification equipment, 16 kinds of waste water treatment equipment and 15 kinds of plastic processing machinery, etc.; improve the technical specifications of the main: oxygen generator from ≤ 30000m3 / h to 50000m3 / h, single sheet Offset presses increased from ≤15,000 sheets/h to ≤16000 sheets/h, web offset presses increased from ≤60000 sheets/h to ≤65000 sheets/h, and the heads of boiler feed pumps increased from ≤2800 to ≤4200m3/h. Circulating pump flow rate increased from ≤4800m3/h to ≤5400m3/h.
The "New Catalogue" of heavy mining industry provides 116 kinds of products, which is 24 kinds more than "Original Catalogue", mainly including: 6 types of crushing and grinding equipment, screw conveyors, mixer reclaimers, hydraulic supports, etc.; The tandem cold rolling mill plate width is increased from <1.7m to ≤2m, and the wire rod mill is increased from ≤100m/s to all specifications; most of the remaining products are in accordance with the original regulations.
The "New Catalogue" of the machine tool industry stipulates 141 kinds, 37 more than the "Original Catalogue", mainly including CNC boring and milling machining centers, CNC heavy-duty horizontal lathes, CNC heavy-duty vertical lathes, CNC heavy-duty grinding machines, CNC gantry milling machines, and CNC heavy-duty. Gear hobbing machine, CNC boring and milling machine, CNC coordinate boring machine, grinding machine, combined machine tool, gantry machining center and some specifications of straightening (flat) machine, forging press, etc. In CNC machine tools, the technical specifications of a batch of machine tools were improved and the processing accuracy was used as a measure. Such as double-column, four-column universal hydraulic press from ≤ 2000t increased to ≤ 4000t; CNC bending machine from ≤ 160t to all specifications; CNC die rotary head press from ≤ 60t increased to all specifications; CNC plate with shear machine from the plate Thickness × width ≤ 8mm × 4000mm increased to ≤ 12mm × 4000mm, as well as horizontal turning machining centers, CNC grinding machines. Non-CNC machine tools, "New Catalog" made a major adjustment, stipulating that all non-CNC machine tools imported are not exempt, including non-CNC metal cutting machine tools, metal forming processing machine tools. A batch of woodworking machinery, foundry machinery, and measuring instruments also increased the technical specifications and expanded the scope of tax exemption.
The "New Catalogue" of the construction machinery industry stipulates 44 kinds, five kinds more than "Original Catalogue", that is, backhoe loaders, shield machines, full-surface boring machines, rotary drilling rigs, and asphalt road milling machines. There are 23 kinds of technical specifications: road rollers, internal combustion forklifts and container forklifts, battery forklifts, motor graders, self-propelled scrapers and tractor scrapers, diesel diesel pile drivers, hydraulic hammers, continuous wall hydraulic grabs, Drilling machines, stabilized soil road mixers, escalators and moving walks, tow pumps, crawler cranes.
The "New Catalogue" of the instrumentation industry stipulates 88 types, which is 55 more than the "Original Catalogue". The main ones are: large-scale decentralized industrial process control equipment (DCS), industrial nondestructive testing equipment, range finder, balance testing machine, temperature measuring instrument , 5 kinds of pressure, level, flow measurement instruments, liquid meter, 5 kinds of automatic temperature control devices, pressure, level, flow automatic control device, regulating valve and so on. There are five types of meteorological instruments for improving equipment specifications.
The "New Catalogue" of the cultural office equipment industry stipulates 51 kinds, 32 more than the "Original Catalogue", mainly including: digital cameras, projectors, slide projectors, miniature readers, 9 kinds of optical components, and 14 types of cameras and accessories. Four photo enlargers and shrinking machines and four kinds of color printing equipment have been expanded from some products to all products. Copy equipment (including all-in-ones) also expanded from some products to all products and components.
There are 155 kinds of "new catalogues" prescribed by the electrical and electronic appliances industry, an increase of 48 kinds from the "original catalogue".
The “New Catalogue†of the packaged food machinery industry stipulates 18 kinds, 7 more than the “Original Catalogueâ€, mainly including: washing and drying equipment and sterilizing equipment for bottles or other containers, glass bottle filling equipment, labeling machines, and can filling Equipment, solid, liquid filling and packaging machines. The technical specifications of the equipment are: three-piece can production equipment, polyester bottle beverage filling equipment, corrugated board production equipment, die-cutting machine and so on.
There are 210 kinds of "new catalogs" in the automotive industry, which are the same as those in the "original catalog."
Summary of Adjustments to the List of Non-Exempted Tax Items in Various Industries of Machinery Industry
There are 997 kinds of machinery and equipment in the “New Non-Exemption Catalogueâ€, which is 260 new types compared to the “No Catalogue for Exemption from Taxes,†and most of them are equipment specifications. The main adjustments in various industries are as follows: 11 categories of “new catalogs†for the agricultural machinery industry, 4 more than the “original catalogueâ€, mainly motorized mowers, hand-held tractors, and sprinkler irrigation equipment; grain combine harvesters with improved specifications; From 170 horsepower to 200 horsepower; the rest is consistent with the original regulations.