1, the removal of substances is not the same, so the treatment process and the required agents are different; 2. The desulfurization process is currently relatively mature, and the denitration process is still improving. The current problems of denitrification: 1. Corrosion problem of denitrification in SNCR furnace; 2. Influencing factors of denitrification are theoretically much more than desulfurization. In the actual project, ammonia is sprayed at the same position in the same combustion condition of the same furnace. Due to the effects of carbon monoxide, wind field, temperature field, and coal quality, it is likely that the results will be very different. . The single biggest difference between denitrification and desulfurization is that the denitration can achieve nitrogen oxide reduction by adjusting the combustion replacement burner in a pulverized coal fired boiler. This method has no operating cost other than the initial investment. The desulfurization is not currently like denitrification. The low-nitrogen combustion reforms such a process with a zero operating cost and a significant effect. China Exhaust Gas Treatment Equipment Trading Network is an e-commerce platform for small and medium-sized waste gas treatment equipment companies. Here, you will find information on the purchase of waste gas treatment equipment and the price of waste gas treatment equipment. Let your sales channels become more abundant and not worry about sales. Everything is very simple here. Decorative Ceiling Fan,Indoor Decoration Ceiling Fan,Decorative Ceiling Fan With 3-Blades,Decorative Ceiling Fan 4 Blade Guangdong Shunde Liangci Electric CO.,LTD , https://www.marckeez.com