Multifunction Granulating And Coating Machine
The multifunction granulating and coating machine has many purposes such as top spray granulating, bottom spray coating, tangent spray small pill making, etc. It is designed to meet various process requirements in the same equipment through the replacement of process parts on the main machine. It is widely used for granulating, small pill making and coating in such industries as Western medicine, traditional Chinese medicine, food, chemical industry, etc.
Multifunction Granulating And Coating Machine,Multifunction Granulating,Powder Coating Machine,Multifunction Granulating Coating Machine Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jyjiruimachine.com
1. It should be placed on a stable operation table to avoid entering the environment with corrosive gas and dust particles.
2. The output port is a special quick interface end face seal. When the instrument is installed, it does not need any tools and it is tightened evenly. After the sealing surface is in contact with the sealing ring surface, it can be screwed.
3, lever pressurization, application of uniform force, to avoid the piston and the bar sleeve bite and shorten the life of the pressure pump.
4. When it is found that the stain is immersed in the pressure pump, open the air release valve, plug the output port with the plug, and use the pump to pressurize the stain. The output interface is removable as a whole and can be removed for cleaning if necessary.
5. Do not switch with pressure.
Pressure Checker Use Notices
The pressure checker uses a few things to pay attention to The pressure checker is an important part of the pressure check meter system. The following points should be noted during the use of the pressure checker: