When driving vacuum cleaners are distinguished based on their mode of operation, they can be divided into two main types of use: First-hand push: Push-type machines of this type are required to have an operator following the operation of the machine when operating, and are mainly responsible for a drive problem of the machine and control of the steering. The second driving style: The driving type vacuum sweeper needs a driving position. The operator needs to sit on the machine to drive and perform the entire operation. Then the scrubber also has some common characteristics of use: 1, are used roller brush or disk brush 2, are used AC, engine-driven or battery-driven. 3, are used to drive the motor drive or use the brush to help walk. Driving vacuum cleaners Push-type vacuum cleaners can be used in those areas of the ground? Ride-on vacuum sweeper Hand cleaning vehicles are versatile and very useful for cleaning equipment, the type of ground work using its use is very broad, including the outdoor and indoor ground, such as: marble floor , concrete floor, tile surface, plastic floor, epoxy floor, terrazzo floor. Can effectively remove the dust and dirt on the ground surface. They are more suitable for use in daily life, and the purchase of professional scrubbing equipment can effectively reduce the frequency of cleaning and work. For those with heavy fouling and stubborn dirt, silt, tire marks, processing waste, solid waste, etc., need to use accessories to write special additional cleaning parts, such as rolling brush pre-scanning system, polyamide fiber brush or special Squeegee bar and so on. For now, as an indispensable member of the cleaning machine, are they suitable for use in those fields? Not only is it suitable for use in the public domain, it is also suitable for use in the private sector. For example, it is an industrial area, a school, an office, a public unit, an airport, a public building, a hospital, and the like. (Text / Sun Ni)
1. The inner core of the electric heat pipe is made of high-quality stainless steel or other materials, with a coat of PTFE, which is highly corrosion-resistant and suitable for heating various corrosive liquids.
2. Low surface power design (1.5kw /CM) to ensure the service life of the product.
3. The installation position of the electric heater should be paid attention to prevent the solid in the solution from depositing on the surface of the electric heater, or the liquid is too thick and the liquid level is too low, which will cause the teflon tube (PTFE) to be burnt due to the poor surface heat.
4. The shape is divided into vertical type and bottom heating "L" and "Z" type.
Teflon Electric​ Heater,PTFE Electric​ Heater,Teflon Ptfe Immersion Heater Element Guangzhou Quanxu Technology Co Ltd , https://www.silicamattingagent.com