New Manual Electrostatic Powder Coating Spray Gun (colo-800DT-06C) HVAC Metal Parts including all the metal parts and accessories of Air Conditioner, heat pumps, ventilation and heating products. Hvac Metal Parts,Air Conditioning Parts,Detachable Through-The-Wall Ac Wall Sleeves,Integrated Through-The-Wall Ac Wall Sleeves Foshan Dinghan Electrical Technology Co., Ltd , https://www.fsdinghanelectrical.com
COLO-800DT-06C Â powder coating unit Provides unsurpassed operator control, coating efficiency and ease of use.
No matter what your application needs,HICOLO has the right powder coating solution for you!
Â
Â
Â
Â
Workpieces type
Output voltage
1STÂ airÂ
2nd airÂ
 Painting distance
Big size new
80-100kv
4-6kg/cm2
2-3kg/cm2
15-20cm
Corner,sides
40-60kv
2-3kg/cm2
0.5-1Â kg/cm2
10-15cm
repaint
20-30kv
2-3kg/cm2
0.5-1kg/cm2
15-20cm
Pic show:Â 
Maintenance and cleaning
We also supply other small cup or hopper power coating machine,Please contact Charlene for more information!
Â
New Manual Electrostatic Powder Coating Spray Gun (colo-800DT-06C)
Model NO.: colo-800DT-06C
Powder Coating System: Manual and Portable
Suitable: for Powder Coating Producer or DIY Coating Job
Useful Capacity: 150 Ml (Approx. 90 G of Powder)
Powder Output: 30 - 400 G/Min
Air Consumption (Application Range: 1, 8 - 4 Nm3/H
Weight Without Connections: 130 G
Powder Cup Hopper Diameter: 66mm
Voltage: 220V/110V/380V
Frequency: 50-60Hz
Gun Weight: 500g
Trademark: COLO
Transport Package: Carton Packing, 10kgs Per Unit
Specification: CE
Origin: China
HS Code: 8424899990
Â
Application cup for COLO-800D  manual powder gun
The application cup is built exclusively for electrostatic coating with organic
powders. Any other use is considered as non-conform.
The application cup is especially suited for manual coating very small series,
test coatings at powder manufacturers, and for laboratory tests.
The powder types used are to be fluidized without vibration.
Typical characteristics
- The application cup is especially suited for working with minimum
quantity of powder
- Precise application parameters lead to repeatable application
performances
- The application cup enables a very quick color change
- The application cup can be connected to an COLO coating unitÂ
colo-06 powder gun by quick release connection - no extra device necessary
Â
Note:
Regular and conscientious maintenance increases the operating life
of the unit and ensures a longer, more constant coating quality
1. Empty any powder out of the application cup
2. Clean the gun and the outside of the application cup by blowing
off, wiping etc.
3. Release the bayonet closure between cup cover and cup
4. Clean the cup
5. Pull out the dip tube and clean it
6. Clean the cup with compressed air