Introduction: As a new type of filter, the mobile bag filter has a special internal structure. The metal basket supports the filter bag, the liquid flows from the inlet, passes through the filter bag and flows out of the outlet, and the filter bag can be used again to replace it.
Eelectric Heating Element,Heating Element,Electric Heating Element,Water Dispenser Heating Element XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de
Mobile bag filters are mainly divided into: top-in single-bag filters and side-into-bag filters, while the top-in single-bag filter consists of a patented loop-type filter bag and related accessories.
Its main advantages: 1. Large filter area 2. Easy to replace filter bag 3. Good sealing 4. Easy to install and debug 5. Small structural stability error.
Thick Film Heating Element Assemble is made up by Stainless Steel Tube Thick Film Heater, plastic shield, interface connectors, thermostats, NTC Sensor, wire leads etc.
Power Density
is up to 60W/cm2.
Temperature
ramp-up between 80℃~150℃/S.
Electric
Heating Circuit printed on tube surface`s insulation layers, and covered by
another insulation layer. Water and Electric is insulated totally.
Thermal
transfer efficiency ≥98%.
Long work life(
> 10000H )
Environment and
Health friendly: Non-electromagnetic radiation and heavy metal ions
Simple
Structure & Compact Profile brings more possibility for new products
R&D.
It can successfully replace Traditional Electric Heating
Tubes/Elements, change their structures and performance completely, which can
reduce energy consumption, increase energy utilization and save space.
Thick Film Heater Elements are widely applied in Instant Hot Water Dispenser, instant boiling water heaters, sous vide circulate cooker, coffee maker, electric heating water faucet, instant water flow heater under sink, formula dispenser, vending machine, etc.
