How to prolong the service life of consumables is a problem that many bosses who purchase a CNC cutting machine are concerned about. If the consumables are not maintained during use, frequent replacement of the consumables is also a disadvantage to the enterprise's production, and it will increase purchases. The cost of the machine. Here's how to extend the life of your consumables. Air Cooler,Condenser Unit,Industrial Evaporative Cooler,Evaporative Cooler TAIZHOU NANFENG COLD-CHAIN CO., LTD , https://www.windpolar.com
Ensure that the correct gas pressure and flow plasma plasma pressure and flow is very important for the life of the consumables. If the pressure is too high, the life of the electrode will be greatly reduced; air pressure is too low, the life of the nozzle will be affected.
Use a reasonable cutting height in accordance with the requirements of the instructions, using a reasonable cutting height, cutting height is the distance between the cutting nozzle and the workpiece surface, when perforated, try to use slightly higher than the perforation height value in the parameter table.
The perforation thickness shall be within the allowable range of the machine system. The cutting machine shall not pierce the steel plate beyond the working thickness. The usual perforation thickness shall be 1/2 of the normal cutting thickness (below 100A). For example, a 100A system shall be cut 1 inch ( About 25mm) of carbon steel, the system perforation thickness should be 0.5 inches (about 12.5mm).
The nozzle should not be overloaded. To overload the nozzle (ie, to exceed the operating current of the nozzle), the nozzle will be damaged quickly. The current intensity should be 95% of the operating current of the nozzle. For example, the current intensity of a 100A nozzle should be set to 95A.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /