Water Based Epoxy Resin,Water Based Epoxy Coating,Garage Floor Epoxy,Waterborne Epoxy Guangzhou Quanxu Technology Co Ltd , https://www.skyelecteflonheater.com
How to protect the daily use of Lingxiang residual pressure monitoring system
With the publication of the national standards GB50016-2014 "Code for Fire Protection Design of Buildings" and GB51251-2017 "Technical Standards for Building Smoke Prevention and Exhaust Systems" and GB16806-2006 "Fire Control System", the application of residual pressure monitoring system is becoming more and more widely used. But as a set of equipment related to personal safety, we can't allow a little mistake in the process of use. After all, the design of this system is based on safe evacuation.
In order to achieve the effect we need, we must also pay attention to the following aspects in daily protection.
The residual pressure valve in the residual pressure monitoring system is generally mechanical, and the mechanical parts are very simple. Because at present, there are very few companies producing these mechanical parts, so they can still be reliable in terms of quality. The main thing is to do the anti-corrosion and lubrication work of each part of the machine, so that in general, the equipment will not be damaged very quickly.
Because the pressure relief valve is usually installed on the top of the building under normal circumstances, there must be good lightning protection measures at this time, because once it is struck by lightning, it will paralyze the entire system, in addition, it is relatively easy Corroded by rainwater, pressing the inlet water will cause the electric conveyor to jam, resulting in the problem that the motor cannot be turned on or the switch cannot be turned on. Once these problems are encountered, remedial measures should be actively taken.
In the daily fire fighting process, the residual pressure monitoring system must not only be well maintained, but also the electrical system wiring must be very standardized, otherwise, it is particularly easy to cause a short circuit in the event of a fire, and the short circuit situation will further lead to Paralysis of the entire pressure relief system.