The general logistics automatic Sorting System workflow is mainly divided into confluence → sorting signal input → sorting and diversion → sorting.
The essence of retail in the future will remain cost, efficiency and experience at the center. The sorting capacity of some sorting centers can reach 9,000 pieces per hour. Under the premise of the same site size and sorting volume, it is estimated that each site can save 180 manpower.
Sorting System,Sortation Conveyor,Conveyor Sorting Systems,Conveyor Line Sorting System DMT Machineries (Suzhou) Ltd , https://www.dmtsz.com
1. It can process 5 wires synchronously, which makes the efficiency higer
2. Prodctivity: MAX. 18000pcs/h
3. High efficiency and saving cost
About us
1. Hiprecise Electronics keeps bringing in and training excellent specialists, providing outstanding products with higher quality and lower price, and distinguishing individual services to meet customers' different demands.
2. Hiprecise Electronics has been engaged in the application and service of electronic equipment in the wiring harness processing area for a long term, and we are the expert with 20 years' manufacturing experience and advanced technology, cooperating with companies in Japan, Occident and Taiwan area.
3. We provide an all-rounded solution to wiring harness processing area for customers from Home Electrical Appliance, Auto, Industrial Control Automation, Instrument, and Meter industries.
4. Our main products include Full-automatic terminal crimping machines, Digital wire cutting & stripping machines, Terminal crimping machines, Applicators for terminal crimping, Industrial robots, and other special wiring harness processing electronic equipment.
We will pay great attention to your any question or enquiry.
If you are interested in our company and products, pls don't hesitate to contact with us, we will offer our best price with good quality for you. We wish to create splendid achievements with you in the future.
   Model
DCS-335
 Cutting Length
0.5-99999mm
 Stripping Length
Front end: 0.5-100mm; Rear end: 1.5-40mm
 Cutting Accuracy
≤ ± (0.5+0.002*L)
 Stripping Range
0.08-1.3mm² (AWG26-AWG8)
  Wire Material
PVC TEFLON, FIBERGLASS WIRE
   Power
220VAC 50HZ
  Air Source
0.4-0.6Mpa
 DimensionsÂ
430mm(W)*430mm(L)*340mm(H)
  Weight
50kg
1. It can process 5 wires synchronously, which makes the efficiency higer
2. Prodctivity: MAX. 18000pcs/h
3. High efficiency and saving cost
About us
1. Hiprecise Electronics keeps bringing in and training excellent specialists, providing outstanding products with higher quality and lower price, and distinguishing individual services to meet customers' different demands.
2. Hiprecise Electronics has been engaged in the application and service of electronic equipment in the wiring harness processing area for a long term, and we are the expert with 20 years' manufacturing experience and advanced technology, cooperating with companies in Japan, Occident and Taiwan area.
3. We provide an all-rounded solution to wiring harness processing area for customers from Home Electrical Appliance, Auto, Industrial Control Automation, Instrument, and Meter industries.
4. Our main products include Full-automatic terminal crimping machines, Digital wire cutting & stripping machines, Terminal crimping machines, Applicators for terminal crimping, Industrial robots, and other special wiring harness processing electronic equipment.
We will pay great attention to your any question or enquiry.
If you are interested in our company and products, pls don't hesitate to contact with us, we will offer our best price with good quality for you. We wish to create splendid achievements with you in the future.
   Model
DCS-335
 Cutting Length
0.5-99999mm
 Stripping Length
Front end: 0.5-100mm; Rear end: 1.5-40mm
 Cutting Accuracy
≤ ± (0.5+0.002*L)
 Stripping Range
0.08-1.3mm² (AWG26-AWG8)
  Wire Material
PVC TEFLON, FIBERGLASS WIRE
   Power
220VAC 50HZ
  Air Source
0.4-0.6Mpa
 DimensionsÂ
430mm(W)*430mm(L)*340mm(H)
  Weight
50kg
1. Confluence: The materials picked from different positions according to the picking instruction are sent to the pre-processing equipment in a certain way, and collected by the pre-processing equipment to the main conveyor line. This process is called confluence.
2. Sorting: The signal input reaches the material on the main conveyor line, and the basic information of the material is read through an automatic identification device (such as a barcode scanner, etc.), and the computer handles the read material information accordingly. This process is called Input for sorting signal.
3. Diversion: After the material information is read into the computer system, it continues to move on the main conveying line. The storage rack sorting system detects the moving position of the material in real time. When the material reaches the corresponding sorting crossing, the control system sends a sorting mechanism to the sorting mechanism. After picking up the order, the sorting mechanism immediately produces corresponding actions to make the material enter the corresponding sorting gate, this process is called diversion.
4. Sorting: The materials entering the sorting crossing finally reach the terminal of the sorting system, and are sorted and transported to the corresponding area by manual or mechanical handling tools.
Digital Automatic Wire Cutter and Cable Stripper Machine (DCS-335)
Model NO.: DCS-335
Warranty: 12 Months
Stripping Range: AWG28-AWG16
Usage: Cutting, Stripping
Controlling Mode: Micro Chip
Place of Origin: China
Trademark: Hiprecise
Transport Package: Wooden Case
Specification: 500mm ( L) *600 mm ( W) *500 mm ( H )
Origin: Xiamen, China
HS Code: 8537101990
Model NO.: DCS-335
Warranty: 12 Months
Stripping Range: AWG28-AWG16
Usage: Cutting, Stripping
Controlling Mode: Micro Chip
Place of Origin: China
Trademark: Hiprecise
Transport Package: Wooden Case
Specification: 500mm ( L) *600 mm ( W) *500 mm ( H )
Origin: Xiamen, China
HS Code: 8537101990
Digital Wire Cutting & Stripping Machine DCS-335