Digital 6 in 1 MMA/TIG/Pulse TIG/Spot TIG/MIG/Pulse MIG Aluminum Alloy Welding Machine, Aluminum Welder, Pulse MIG Welding Machine

September 23, 2022

Model NO.: Aluminum alloy welding machine, aluminum welder
Trademark: SHELLMAX
Specification: CE CCC
Origin: China
HS Code: 85153900
Model NO.: Aluminum alloy welding machine, aluminum welder
Trademark: SHELLMAX
Specification: CE CCC
Origin: China
HS Code: 85153900
1. All digital soft switch inverter technology
2. With 100 group accurate authority expert database inside, it supports synergic adjustment of the common 13 kinds of metal
3. It has MMA, MIG, PULSE MIG
4. Because it uses the projected transfer, so it could get all-position welding, especially suitable for the welding of non-ferrous metal such as aluminum alloy, stainless steel and copper alloy, no splash, good welding formation.
5. Because of the grain refinement, it is very suitable for welding all kinds of high tension steel.
6. Deep weld penetration, because of the hammering action of the peak current, the penetration is much deeper than the MIG
7. It's able to realize the centralized monitoring and control, it has WiFi model inside, so it could be communicated with the computer, cell phone and wireless devices inside the wireless LAN.
8. It is the first one to use the DEVICENET inside the welding machine, it could connect to robot and special system, easy to achieve automatical welding
9. The enclosed dual drive wire feeder has the function of rate feedback to ensure the wire clean and steady of the feeding.
10. Reliability, performance is similar with the other European brand welding machine, but the price is just 1/3 of the European brand welding machine.
Model AAP-mig315AL AAP-mig350A AAP-mig400A AAP-mig500A AAP-mig630A
Rated current 10-315 10-350 10-400 10-500 10-630
Thickness 0mm-25mm
Wire feed speed 1m/min-22m/min
Arc length from -50% to 50%
Arc force from -50 to 50
Material type 13 kinds
Wire diameter 0.8, 1.0, 1.2, 1.6
Operation mode 2T, 4T, S2T, S4T, Spot, JOB
Start current (HotI) 0%~200%
End current (EndI) 0%~200%
Start time(Hott) 0.1s~15s
End time(Endt) 0.1s~15s
Burn time (Burn) 0%-20%
Spot time(Sptt) 0.01s~2s
Double pulse frequency(Freq) 0.5Hz~5Hz
Second arc length (AL2) -50%~50%
Double pulse range (Fd2) 0m/min~2m/min
Transit time(SLOP) 0.1s~15s
1. All digital soft switch inverter technology
2. With 100 group accurate authority expert database inside, it supports synergic adjustment of the common 13 kinds of metal
3. It has MMA, MIG, PULSE MIG
4. Because it uses the projected transfer, so it could get all-position welding, especially suitable for the welding of non-ferrous metal such as aluminum alloy, stainless steel and copper alloy, no splash, good welding formation.
5. Because of the grain refinement, it is very suitable for welding all kinds of high tension steel.
6. Deep weld penetration, because of the hammering action of the peak current, the penetration is much deeper than the MIG
7. It's able to realize the centralized monitoring and control, it has WiFi model inside, so it could be communicated with the computer, cell phone and wireless devices inside the wireless LAN.
8. It is the first one to use the DEVICENET inside the welding machine, it could connect to robot and special system, easy to achieve automatical welding
9. The enclosed dual drive wire feeder has the function of rate feedback to ensure the wire clean and steady of the feeding.
10. Reliability, performance is similar with the other European brand welding machine, but the price is just 1/3 of the European brand welding machine.
Model AAP-mig315AL AAP-mig350A AAP-mig400A AAP-mig500A AAP-mig630A
Rated current 10-315 10-350 10-400 10-500 10-630
Thickness 0mm-25mm
Wire feed speed 1m/min-22m/min
Arc length from -50% to 50%
Arc force from -50 to 50
Material type 13 kinds
Wire diameter 0.8, 1.0, 1.2, 1.6
Operation mode 2T, 4T, S2T, S4T, Spot, JOB
Start current (HotI) 0%~200%
End current (EndI) 0%~200%
Start time(Hott) 0.1s~15s
End time(Endt) 0.1s~15s
Burn time (Burn) 0%-20%
Spot time(Sptt) 0.01s~2s
Double pulse frequency(Freq) 0.5Hz~5Hz
Second arc length (AL2) -50%~50%
Double pulse range (Fd2) 0m/min~2m/min
Transit time(SLOP) 0.1s~15s

Bimetallic Parallel Screw and Barrel

The outer surface of the screw is cut into a cylinder with a spiral groove or a cone with a tapered spiral groove. The screw has a different head, the head is called an external hexagonal screw. There are others, such as large flat screws, hexagon socket screws and so on.

Commonly used screw materials in China are No. 45 steel, 40Cr, ammoniated steel, 38CrMOAl, high-temperature alloys and so on.

Bimetallic Parallel Screw And Barrel,Barrel Screw For Extruder,Screw And Barrel Set,Barrel Screw

ZHOUSHAN JINTANG OULIN MACHINERY CO., LTD. , https://www.oulinscrewbarrel.com