(1) the use of diaphragm before and after the action of the diaphragm and the pump head changes between the ball valve up and down movement to form a vacuum adsorption and push phenomenon to achieve the purpose of liquid delivery. â‘¡ When the diaphragm forward push, the ball valve seat and seat airtight, so that the liquid will not pass, and the outlet forward due to the diaphragm push the ball valve open, the liquid spit (2) by the above principle of action we can simply know the diaphragm, pump head, ball valve ball seat caused by any one of the factors of leakage can not achieve the purpose of delivery, or abnormal flow, usually resulting from the failure of the four main components for: â‘ ball seat and ball valve can not be airtight â‘¡ entrance, exit foreign body obstruction â‘¢ damaged diaphragm Therefore, if the liquid is transported abnormally, the handling in this respect should be resolved. The factors that cause the above situation are too numerous to mention. We can only determine the condition of piping, fittings and operation at that time. Pool Heat Pump,Heat Pump For Pool,Pool Heating,Swimming Pool Electric Heat Pump Guangdong Y.K.R New Energy Co.,Ltd , https://www.ykrheatpumps.com
â‘ When the diaphragm is pulled backwards, the outlet ball valve falls tightly close to the ball seat, the inlet ball valve rises upward due to the vacuum generated between the diaphragm and the pump head, and the liquid is sucked up.