Plastic Mesh Bags are a popular choice for packaging and transporting a variety of products, including produce, seafood, and firewood. These bags are made from a durable plastic material that is lightweight, breathable, and flexible. Here are some of the key features and benefits of plastic mesh bags: Plastic Mesh Bags,Red Onion Mesh Bags,Packing Net Mesh Garlic,Onion Potato Mesh Net Suzhou Yitengjia Extruded Net Packaging Co., Ltd. , https://www.ytjnetbag.com
Plastic Injection Molds Parts Service
Xiamen Meteor offers more injection molds parts design and manufacturing service, we have more 10+ experience in injection molds field. All of projects we will put them from DFM to PFM working flow to ensure products quality, from molds design, mold flow analysis, per-mold machining review a series of testing reports to make sure mold production running smoothly. We are proud of our mold producing flowing, product quality guarantee, delivery on time and we have professional engineer team to support your projects, make it so easy, make you so comfortable.
Plastic Mold Design Guidelines
Size
The maximum part outline that can be molded is approximately 18.9 in. (480mm) by 29.6 in. (751mm) or roughly equivalent to 175 sq. in. (1,129 sq. cm.). A maximum part volume of approximately 59 cu. in. Depth up to 4 in. (101mm) from the parting line with 3 degrees of draft, or up to 8 in. (202mm) total if the parting line can pass through the middle of the part, inside and outside. Deeper parts are limited to a smaller outline.
Draft
A taper applied to the faces of the part that prevent them from being parallel to the motion of the mold opening is called draft. This keeps the part from being damaged due to scraping as the part is ejected out of the mold. Recommended draft:
0.5 degrees on all vertical faces is strongly advised.
2 degrees works very well in most situations.
3 degrees is minimum for a shutoff (metal sliding on metal).
3 degrees is required for light texture (PM-T1).
5 or more degrees is required for heavy texture (PM-T2).
Tolerances
Typically, Proto Labs can maintain a machining tolerance of ±.003 in. (0.08mm) with an included resin tolerance that can be greater than but no less than ±.002 in./in. (0.002mm/mm).
Wall thickness
With injection-molded parts, observing proper (and uniform) wall thickness helps parts avoid potential issues such as sink marks and warpage. Recommended thicknesses vary by material:
Resin
Inches
ABS
0.045 -Â 0.140
Acetal
0.030 -Â 0.120
Acrylic
0.025 -Â 0.500
Liquid crystal polymer
0.030 -Â 0.120
Long-fiber reinforced plastics
0.075 -Â 1.000
Nylon
0.030 -Â 0.115
Polycarbonate
0.040 -Â 0.150
Polyester
0.025 -Â 0.125
Polyethylene
0.030 -Â 0.200
Polyphenylene sulfide
0.020 -Â 0.180
Polypropylene
0.025 -Â 0.150
Polystyrene
0.035 -Â 0.150
Polyurethane
0.080 -Â 0.750
Surface finish
A number of standard finishes are available for injection-molded parts at Proto Labs. Our current finishes include non-cosmetic, low-cosmetic and EDM finishes; bead-blast texturing; and high-end mold polishing.
Standard finishes (from least to most costly):
PM-F0:
Non-cosmetic: finish to Protomold discretion
PM-F1:
Low-cosmetic: most toolmarks removed
PM-F2:
Non-cosmetic: Protomold discretion, EDM finish and/or toolmarks permissible
SPI-C1:
600 grit stone, 10-12 Ra
PM-T1:
Protomold texture, SPI-C1 followed by light bead blast
PM-T2:
Protomold texture, SPI-C1 followed by medium bead blast
SPI-B1:
600 grit paper, 2-3 Ra
SPI-A2:
Grade #2 Diamond Buff, 1-2 Ra
*"PM" in the table signifies a surface finish adjusted to fit the quick-turn injection molding process, where SPI (The Society of the Plastics Industry) denotes an industry-standard finish.Radii
Because Proto Labs employs an automated CNC milling process to make the mold for your parts, some part corners will end up with a radius rather than a sharp edge. This does not usually require a change to the model, but the designer is made aware of these radii before the mold is made.
Ejector pins
Proto Labs' injection molding process uses ejector pins of various sizes to push the plastic part out of the mold after it has solidified. The sizes and arrangement of these pins are selected to minimize the impact on your part design. Ejector pins range in size from 0.063 in. (1.6mm) to 0.5 in. (12.7mm), with sizes larger than 0.063 in. (1.6mm) preferred.
Undercuts
Our molding process supports simple undercuts in your part geometry. Maximum side core dimensions:
Width
Height
Pull
≤ 8.419 in
≤ 2.377 in
≤ 2.900 in
≤ 213.84mm
≤60.38mm
≤73.66mm
Materials
Proto Labs stocks hundreds of thermoplastic resins for injection molding that offer a variety of benefits for many different applications and industries. See full list of materials.
Â
1. Breathability: The mesh design of these bags allows air to circulate freely, which helps to keep the contents fresh and dry. This is especially important for produce and seafood, which can spoil quickly if they are not properly ventilated.
2. Strength: Plastic mesh bags are strong and durable, which makes them ideal for carrying heavy or bulky items. They can withstand the weight of multiple items without tearing or breaking.
3. Flexibility: The flexible nature of plastic mesh bags makes them easy to handle and store. They can be folded or rolled up when not in use, which saves space and makes them convenient to transport.
4. Visibility: The mesh design of these bags allows the contents to be easily seen, which is useful for identifying products and checking for damage or spoilage.
5. Versatility: Plastic mesh bags can be used for a variety of purposes, including packaging, storage, and transportation. They are suitable for use in a range of industries, from agriculture and fishing to retail and logistics.
6. Cost-effective: Plastic mesh bags are an affordable packaging option, making them a cost-effective choice for businesses and consumers alike.
Customized Plastic Products Outdoor Industrial Garbage Can Plastic Waste Bin Injection Mould
Model NO.: MT
Runner: Hot Runner
Design Software: AutoCAD
Installation: Fixed
Certification: TS16949, CE, ISO, FDA
Standard: HASCO
Customized: Customized
Trademark: Customized
Transport Package: Customized
Specification: Customized
Origin: Xiamen, China
HS Code: 3926909090
Customized Plastic Products Outdoor Industrial Garbage Can Plastic Waste Bin Injection Moulding Plastic Mold Design Mold Development Mold Processing Mold Injection