China Waste Plastic Grinding Milling Granulator Making Machine

December 05, 2024

Model NO.: WSZL series
Capacity: 50 Sets Per Month
Key Word 1: Plastic Grind Machine
Key Word 2: Plastic Machine
Key Word 3: Plastic Grinder Machine
Trademark: WSZL
Transport Package: Wooden Cases
Specification: 1 cubic
Origin: Henan
HS Code: 8474809090
China Waste Plastic Grinding Milling Granulator making machine


Model 150 Plastic Grinding Milling Granulator
The machine adopts Japanese design principles, employs the principles of grinding rapidly, agitating continuously, milling and fractioning to be heated with multi-knives and cooling and contracting. It produces granules from waste materials and angle materials such as the plastic films, filament, ribbons, pieces, soft plastic pipes, foaming materials, and degrading materials, and puts then into reproduction .It is the latest ideal granulating equipment to recycle plastics and reproduce.
 
Main Functions:
1. Recycle the waste materials and leftover bits and pieces of various flexible plastic films, bags, filament, ribbons, pieces, and pipes such as polyvinyl chloride, polyethylene of higher density, and linear polyethylene of lower density, and put them into reproduction.
2. Recycle and reproduce the grinding and granulating of degrading plastic films and angle materials.
3. Grind chemical fiber waste materials, and process the waste filament that has been put into reproductions.
4. The machine is applied in many respects. It can be substitute for blending machine or dryer.
 
Main Features:
A: Milling, mixture and staining can be processed all in one
B: The machine takes up little area of land
C: It is characterized by simple structure and ease of operation
D: The interstitial of the blade can be adjusted with convenience of replacing.
E: It is characterized by high efficient in production and low consumption(1 ton of daily production ,and 200 degrees of electricity consumption ).
F: Granulate at lower temperature, do not damage molecular structure of materials basically, and do not damage physical performance.
 
Plastic flakes grinding and milling combined granulator machine
Model WSZL-150 WSZL-100 WSZL-500 WSZL-300
volume of machine 150L 100L 500L 300L
Capacity 60-80kg/h 30-60kg/h 300-400kg\h 200-250kg\h
Power of motor 18kw 15kw 55kw 37kw
Water setting 125w 125w 125w 125w
Heating motor 1.5kw 1.5kw 1.5kw 1.5kw
Rotating speed 660r/min 660r/min 660r\min 660r\min
size 1500×700×1400mm 1300×600×1300 mm 2300*1200*1600mm 2000x1000x1400mm

Shoulder Muscle Training

There are many ways to use fitness equipment for shoulder exercises.Enhance muscle strength, improve joint flexibility, or increase muscle volumeThe movements for exercising the shoulders are as follows:

Action 1: Lie on your side and lean on a stool, holding a small dumbbell in each hand. At the beginning of the action, lift the dumbbell upwards. This movement mainly trains the posterior deltoid muscle.

Action 2: Inverted Butterfly Machine. Generally, butterfly shaped machines are only used to clamp the chest, while such reverse butterfly shaped machines can train the shoulder, back, and rhomboid muscles. The same weight should not be too large, otherwise the trapezius muscle will also work.

Action 3: Dumbbell side lift. Side lift is the most common shoulder movement. It is important to remind everyone not to lift the dumbbell too high during the process, as it may also affect the trapezius muscle.

Action 4: Use a gantry to perform a lateral rope lift, alternating hands on the rope to lift it up. One thing that is better than dumbbell barbells in training is that it can keep muscles full of tension.

Shoulder Lift Trainer,Shoulder Press Rack,Rowing Machine,Lateral Raise,Lat Pull Down

Xuzhou Hongxing Gym Equipment Co., Ltd , https://www.hxyfitness.com