In December, the manufacturing plant of the Jitong Automotive Parts Industrial Park in Shuangyang District, Changchun City was even busier. A model of the German auto brand that is hot in China is about to usher in new generations, and new chassis parts are being made here. Changchun, which has a reputation as the “automobile city†in China, is stepping up efforts to build an auto parts industry cluster. At present, many of the world's top luxury car brands have handed over production orders for core components to this Chinese city. Located in Shuangyang District, this industrial park is part of Jilin Province General Machinery (Group) Co., Ltd., which has achieved a sales revenue of RMB 12 billion. Parts produced using aluminum casting and forging technology are mainly supplied to Volkswagen, Audi, and Porsche. , Mercedes-Benz, BMW and other auto brand OEMs. Li Xiaoxuan, executive deputy general manager of the company, pointed to the wheel bracket of an Audi model exhibited on the workshop, saying that this is a new generation of components that will be available in the first half of next year. “Customers and us have prepared for this for two to three years. ". At the end of the main road of the industrial park, a large slogan board is extremely eye-catching: it is committed to building the world’s largest R&D and production base for auto parts. Li Xiaoxuan said that they plan to achieve this goal by 2026. At present, the company has established two joint ventures in China with two companies in Europe, and has introduced advanced aluminum forging and processing technologies for auto parts to China. “Lightweighting is an important means of energy saving and emission reduction for automobiles. We use aluminum materials instead of steel for R&D and manufacturing and are at the forefront of the nation,†said Li Xiaoxuan. At present, the global automotive industry is in a period of great changes in various technologies and innovative applications. Changchun, China's automobile industry, is also closely following the trend of the future and seeks to develop the industry to high-end. In the Changchun Automobile Economic and Technological Development Zone, an international cooperation zone for parts and components is being built on the basis of the existing six industrial parks such as powertrains, shaft gears, molds, private economy, industrial incubation, and Fuao. The goal is to At the end of the 3rd Five-Year Plan period, the total number of parts and components companies exceeded 500, forming a complete chain supporting system for auto parts. Qu Xingtao, deputy director of the Changchun City Bureau of Industry and Information Technology, told reporters that the local company is leading a large number of projects such as the FAW EA211 engine and millions of engines and the Audi Q factory to lead the transformation and upgrading of the automobile and parts manufacturing industry. The opening of the local international freight trains to Europe has facilitated the development of European auto parts for auto parts produced in Changchun. "Swedish and German customers urgently needed a batch of parts. If the cost of air transportation is too high, and there is an international freight train, the speed is fast and the price is reasonable. This business has become a success." Li Xiaoxuan cited an example to rely on leading to Europe. The railway artery of major automobile production bases, where auto parts products have become very competitive.
1.Welding materials
In
Welding, substances called filler materials or consumables are used. As the
name implies, these substances provide filler or a body of molten materials
that provides a strong bond to be formed between the base metals used. Most
welding processes will also require some form of shielding to protect both the
main components and filler from being oxidized during the process.
The
type of welding materials used during welding depends on the nature of the job
intended. Electrodes draw the necessary energy in order to perform welding
applications. Luoyang Golden Egret Company has any kind of welding materials
include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod,
Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.
Welding
can be applied in different kinds of industries such as building and
construction, oil and gas, marine, power generation, steel, mine tools,
automobile, transportation and etc.
2. Welding rod
1)Cast tungsten carbide based tubular
rod
The
hard phase of the rod is cast tungsten carbide which leads to higher hardness
and better wear-resistance.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65
Mainly
used for Mining machinery, Geological tools, Petroleum drilling tools etc, by
Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GT1103
(CTC, 60-80 mesh),
GT1103-1(CTC, 20-30 um),
GT1103-2(CTC,
40-60 um)
2)The hard phase of tube rod is carbide
pellets which leads to higher impact resistance and better wear resistance than
CTC cloase rod.
Wear
resistance: the wear resistance is 6-7 times better than others. Tested by ASTM
G65 wear test.
Mainly
used for mining machinery. Geological tools etc; by Oxy-acetylene with weak
carburizing flame.
Product recommendation:
GT2102 (Cemented carbide grit, 30-60mesh)
GT2102-2(Cemented carbide grit, 30-40mesh)
GT2102-3(Cemented carbide grit, 40-60mesh)
3)Tube rod is composited by Cemented carbide
pellets, Spherical CTC and CTC. The layer has higher impact resistance, better
wear resistance and good fluidity than other rods.
Wear resistance: the wear resistance is 6-7
times better than others. Tested by ASTM G65.
Mainly used for oil method drill bits, such as
Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT3302 (carbide pellets, 20-40mesh)
GT3302-1(carbide pellets, 14-40um)
4)The hard phase of the rod is monocrystal WC,
the welding layer has a higher wear resistance and better impact resistance.
The wear resistance is 6-7 times better than
others, tested by ASTM G65 method.
Mainly used for the repair and strength for oil
drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak
carburizing flame.
Product recommendation:
GT4104 (Monocrystal WC, 80-200mesh)
3. Welding Rope
Made
form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The
CTC is in spherical or irregular with good wear resistance; the nickel alloy is
in spherical or nearly spherical shape with good wettability and erosion
resistance and better corrosion resistance than tubular rod.
Recommend
to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice,
Coal drill pipe, Tunnel drilling machinery etc.
By
Oxy-Acetylene Welding with weak carburizing flame.
Product
recommendation:
GS110450N
(CTC, 4mm, HRC 47-55)
GS110550N
(CTC, 5mm, HRC 47-55)
GS110650N
(CTC, 6mm, HRC 47-55)
4. Welding Bar
The
rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is
in irregular or spherical shape with better wear resistance and the nickel
alloy is in spherical or nearly spherical shape and has good wettability with cast
tungsten carbide. The cladding layer has a higher impact resistance and better
wear resistance.
Its
wear resistance and corrosion resistance is between tube rod and flexible rope.
Mainly
used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner
drill stem and Mechanical parts of Tunnel rock drill machine etc.
Welded
by Oxy-Acetylene with weak carburizing flame.
Product
recommendation:
GD4025253-3(CTC, SCTC, 4*600/6*600)
GD4030303-3(CTC,
SCTC, 4*600/6*600)
5. Welding wire
Intensified molybdenum titanium vanadium
composite chromium carbide welding wire can improve layer`s bonding strength
and tenacity. This wire can use for multilayer welding which has no peel off,
and it can maintain good wear resistance under certain impact working condition.
Product recommendation:GSQD671Mo-4(1.6mm)
Medium carbon and high chromium wear resistance welding wire has a higher
hardness, stronger wear resistance, and excellent toughness by adding a certain
amount of molybdenum alloys and boride. It has a better impact resistance and
strip resistance than high chromium cast iron type materials
Product recommendation: GSQD621Mo-4(1.6mm)
With
high sphericity & excellent alloy organization, cemented carbide pellet is
mainly used in welding, as an adding material of PTA Powder , tubular welding
rod, to improve the wear resistance of the workpieces greatly.
Product recommendation: GQ06
Cemented
carbide grit with different percent of cobalt has good abrasive resistance and
is widely used for making grinding, polishing and cutting tools.
Product
recommendation: GS08A
Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcalloypowder.com
