Automatic Single Barbed Wire Machine

Model NO.: JIAKE CS-B
Barbed Wire Diameter: 1.6-2.8mm
Production: 40kg/H, 17m/Min
Raw Material: Hot Dipped Galvanized Wire, Electric Galvanized Wi
Weight: 1000kg
Trademark: JIAKE
Transport Package: Plastic Films
Specification: 3100*1000*1150mm
Origin: China
Automatic Single Barbed Wire Machine

Automatic Single Barbed Wire Machine


Description:
1 Application: The machine can produce barbed wire which is extensively used in national defenses, military, railway, agriculture, animal husbandry and other industries. 
2 CS-B machine produces single wire barbed wire machine,this machine only one parts.
3 This barbed wire consists of 3 wires.One goes into machine forming the strand wire.Other 2 goes into machine from side becoming barbed wire.
4 Wires bind together when barbed wire formed.The slot knife and cutter make the single barbed wire.
5 Control cabinet start and stop machine easily.
6 Slot knife and cutter are easily worn-out parts.Generally,slot knife need changing monthly,cutter usually half a year.
7 Twisting head twists 2 side wires becoming barbed wire.It has much business with production.

Advantage
1Barbed wire machine model B saves materials.
2 Easy to set up,will apply video of machine installation and test.
3 Steel cover on driving shaft and machine cover for safety operation;
4 Saving materials and high capacity;
5Counter to count the number of barbs and calculate length of barbed wire.
6 Button switches and leveler to start and stop machine easily.
7 Quick and easy to take off roll from the machine
8 Guiding system to avoid wire snarls.
9 French Schneider low voltage electronics.


Application:  

      The machine can produce barbed wire which is extensively used in national defenses, military, railway, agriculture, animal husbandry and other industries.

Technical data:
  Unit CS-A CS-B CS-C
Motor power KW 2.2 2.2 2.2
Main drive shaft speed r/min 402 355 355
Strand wire diameter mm 1.6-3.0 2.0-3.0 1.6-2.8
Barb wire diameter mm 1.6-2.8 1.6-2.8 1.6-2.8
Barb pitch Inch 3" 4" 5" 6" 3" 4" 5" 6" 3" 4" 5" 6"
Twisted number   3-5   7
Raw material   Galvanized steel wire ,stainless steel,black wire,
PVC Coated wire
Galvanized steel wire ,stainless steel,black wire, Galvanized steel wire,stainless steel,black wire,
PVC Coated wire
Production    70kg/h,
20 meters/minute
40kg/h,
17 meters/minute
40kg/h,
16.5 meters/minute
Total weight KG 1200 1000 1000
Dimension mm 1950×950×1300 3100×1000×1150 3100×1000×1150
1760×550×760


Automatic Single Barbed Wire Machine

Automatic Single Barbed Wire Machine
Load


Automatic Single Barbed Wire Machine



Automatic Single Barbed Wire Machine

Industrial Autoclaves

AAC Steam Autoclave is also called still kettle,a large,heavy pressure container which is widely used in autoclaved aerated concrete block, concrete pipe pile, lime-sand brick, fly ash brick, microporous calcium silicate board, insulation asbestos board, high-strength gypsum building materials.

Generally after the process of steam curing (in fact it is Cao-Si02- H2O water thermal chemical reactions that take place inside the autoclave) products get the ultimate strength,it is the desired effect of increased service life.It also suitable for rubber and wood drying and anti-corrosion,etc.

Industrial Autoclaves,autoclave for aac plant,AAC Block Autoclave,autoclavable aerated concrete block,autoclave aerated concrete

Henan Yuanda Boiler Co., Ltd. , https://www.industrysteamboiler.com