SZS Series Oil Gas Fired Boiler Water Tube Boiler,Large Capacity Steam Boiler,Water Tube Gas Oil Fired Boiler,Water Tube Gas Fired Boiler,Water Tube Oil Fired Boiler Henan Yuanda Boiler Co., Ltd. , https://www.steams-boiler.com
The measuring system of the meter is composed of joints and springs. The displacement of the free end of the spring tube is caused by the change of the measured pressure, and the link lever is used to drive the pointer rotating end of the gear of the fan wheel to indicate the corresponding pressure value on the scale board. In order to eliminate the gap between the fan and shaft gear activities. Discoid hairsprings are mounted on the shaft gears.
High pressure gauge specification
This article outlines some of the knowledge about the application and selection of high pressure gauges and hopes to help everyone in their work and study!
SZS series oil gas fired water tube boiler adopts double-drum "D-type" vertical arrangement, full-membrane wall structure, reasonable and compact layout, can realize large-capacity boiler overall quick installation, less investment in boiler house infrastructure and short installation period.
Core technology:
1. Nitrogen oxide emissions <30mg/m3;
2. Full water membrane wall structure
3. Compound water circulation structure
4. Cascade utilization of waste heat from flue gas
5. Spring type explosion-proof door
6. Aluminum silicate insulation layer
Application of high pressure gauge
Y-150 series high pressure gauge (single coil spring tube) is suitable for measuring the pressure of liquid, gas or steam which is not corroded, crystallized, solidified or precipitated.
Model and name
Measurement range (MPa)
Accuracy
Nominal diameter (mm)
Connector thread
Ambient temperature
Relative humidity
Y-150 series pressure gauge
0-10; 0-16; 0-25; 0-40; 0-60; 0-100
±1%FS or ±1.5%FS
Φ150
M20×1.5
-40-70°C
≤80%
Y-200 series pressure gauge
0-100;0-160;0-250
Φ200
Y-250 series pressure gauge
0-400; 0-600; 0-1000
Φ250
G1``
5-40°C